VIP100 II Rx
VIP-100 II Rx

HDMI over IP Receiver (Decoder) with PoE


The VIP-100 II IP video receiver extends and distributes HDMI, RS232, and IR over IP. The VIP-100 II also provides point-to-point extension at distances up to 394 ft., as well as matrix switching of multiple devices, all with PoE support and convenient channel-viewing using the front panel LED display.

The VIP-100 II HDMI over IP distribution system provides video, audio, RS-232, and IR extension, distribution and matrix switching capabilities. Transmitter (encoder) and receiver (decoder) modules can be connected together for point-to-point extension over distances up to 394 ft. (120 m), as well as a point-to-many, many to point, and matrix connections providing up to a 64x190 matrix switching system, or even a 64 x 65K system based on Class B networks.

 

 

Key Features:

  • Support resolutions up to Full HD/1080p
  • LED channel display
  • Front panel channel plus/minus buttons
  • IR remote control for familiar channel selection
  • PoE (Power over Ethernet) – power encoders/decoders from 802.3af PoE network switches
  • RS232 & IR extension/distribution
  • HDMI Loop out on Transmitter
  • HDCP compliant
  • Point-to-point or matrix system:
    - up to 64 x 190 matrix (hardware) on Class C networks
    - up to 64x 65K on Class B networks
HARDWARE
AUDIO HDMI w/embedded audio
CABLING Cat 5 UTP or better
INPUT SIGNAL TYPES (Tx) HDMI v1.3, RS232
(Rx) RJ-45, H.264 UDP Multicast, RS232, IR
OUTPUT SIGNAL TYPES (Tx) RJ-45, H.264 UDP Multicast, RS232
(Rx) HDMI v1.3, RS232, IR
PERFORMANCE
SUPPORTED DISTANCE 120 m / 390 ft.
DATA TRANSFER RATE 15Mbps (typical)
SUPPORTED RESOLUTIONS Up to1080p / 1920x1080
HDCP COMPLIANCE 1.3
RS-232 2400-115K baud, user-settable
IR EXTENSION Rx to Tx (38-56 KHz)
CONNECTOR(S)
CONNECTOR TYPES (TX) 2 - HDMI (19 pin) Female
1 - RJ-45 Female (LAN)
1 – Phoenix 3pin (RS232)
1 – 1/8” Female (IR)
CONNECTOR TYPES (RX) 1 – HDMI (19 pin) Female
1 – RJ-45 Female (LAN)
1 – Phoenix 3 pin (RS232)
1 – 1/8” Female (IR)
POWER
INPUT POWER REQUIREMENTS 5 VDC, 600mA typical
POWER ADAPTER 120-240 VAC to 5 VDC, 1A
PoE (POWER OVER ETHERNET) 802.3af
DIMENSIONS & WEIGHT
ENCLOSURE TYPE All metal, black powder coat finish
DIMENSIONS 1.1” x 4.7” x 3.1 (29 mm x 120 mm x 79 mm)
WEIGHT 0.61 lbs [280 g]

Description

Version

Size

Format

Last Updated

User Manual

V1.0

392 KB

PDF

Feb. 2017

Product Sheet

V1.0

2.65 MB

PDF

Dec. 2016