DTS1000RV

DTS1000RV is a floor box-type fiber-optic extension system which is capable of transmitting DVI/HDMI/VGA video, 3.5 stereo audio, and RS232-C signals to remote locations (max distance up to 1000m or 0.62 miles). DTS1000RV is equipped with readily available multimode fiber-optic and CAT5 cables, making this system a convenient and affordable solution for transmitting high-quality digital and analog video, as well as audio signals in various applications.

 

DRS1000RV

DRS1000RV is a floor box-type fiber-optic extension system which is capable of transmitting DVI/HDMI/VGA video, 3.5 stereo audio, and RS232-C signals to remote locations (max distance up to 1000m or 0.62 miles). DRS1000RV is equipped with readily available multimode fiber-optic and CAT5 cables, making this system a convenient and affordable solution for transmitting high-quality digital and analog video, as well as audio signals in various applications.

 

OLC II Tx/Rx Kit

PureLink’s new OLC II DVI Pure Fiber Optic Extension Modules extend 1080p HD content up to 6,600 feet over a single-mode and up to 1,650 ft over a multi-mode cable. Featuring PureLink’s unique Auto-EDID feature, a separate DDC connection is no longer necessary. This simplifies cable management and ensures rapid communications between devices. 

 

OLC Tx/Rx Kit

PureLink’s OLC DVI Pure Fiber Optic Extension Modules extend 1080p HD content up to 1650 feet over 4 strand multi-mode cable. Featuring PureLink’s unique Auto-EDID feature, a separate DDC connection is no longer necessary. This simplifies cable management and ensures rapid communications between devices. 

 

ODA II Rx

Purelink’s new ODA II Tx / Rx is a standalone fiber optic signal extension system capable of transmitting DVI/HDMI, 3.5mm Stereo Audio and RS-232 signal over a two strand fiber-optic cable. In addition, the fiber type can be either single mode or multimode. There is a distinctive difference in the distance depending upon the type of fiber cable that is being used.

 

ODA II Tx

Purelink’s new ODA II Tx / Rx is a standalone fiber optic signal extension system capable of transmitting DVI/HDMI, 3.5mm Stereo Audio and RS-232 signal over a two strand fiber-optic cable. In addition, the fiber type can be either single mode or multimode. There is a distinctive difference in the distance depending upon the type of fiber cable that is being used.

 

ODC Tx/Rx Kit

The Purelink ODC dual-link DVI fiber optic extension system allows to extend highest quality digital video signal and audio signal ( optical & coaxial ) up to 1,640 ft over fiber optic cabling. No more copper wiring bewtween transmitter and receiver for DDC2B and the transmission of 5v power. To ensure a reliable connection, Purelink EDID management system automatically manages EDID by mainaining continuous EDID communication between connected devices( monitor & video source ). Since it uses only fiber, transmission of content is highly secure and immune to outside interference and it is favored in government, military, school and medical environments.

 

HDX II Tx

PureLink’s next generation modular HDX II is designed to be used in installations where large scale matters. It can extend HDMI™ v1.3 content at 1080p up to distances of 5000 feet, with full HDCP compliance. The LC Fiber Optic cable is robust enough to be pulled through long conduit paths without damage, with termination into the separate transmitter and receiver modules at each end.

 

HDX II Rx

PureLink’s next generation modular HDX II is designed to be used in installations where large scale matters. It can extend HDMI™ v1.3 content at 1080p up to distances of 5000 feet, with full HDCP compliance. The LC Fiber Optic cable is robust enough to be pulled through long conduit paths without damage, with termination into the separate transmitter and receiver modules at each end.

 

F1 Tx/Rx

The F1 HDMI over Single Fiber Extender provides KVM extension of Ultra-HD/4K HDMI v1.4b up to 300 meters, as well as USB up to 200 meters, all over a single multimode fiber cable.  The F1’s compact size and mounting rails make installation a snap, making it the most complete and reliable solution for long-distance Ultra-HD/4K signal transmission.

 

PS-6200

The PS-6200 is a complete, high definition A/V signal-routing solution for simple conferencing environments, including classrooms, boardrooms, and video-conference rooms.

 

HDS-41R

The HDS-41R allows number of digital video sources (with audio) to deliver one high quality picture video display (with audio). Our unique switch allows easy switching between different digital video sources (with audio) with remote control unit and/or with a manual toggle button in front and/or via RS232 port.