HDG Pro
HDG Pro

4K/HDCP 2.2 Signal Generator & Analyzer w/Touch Panel


The HDG 2.0 is and advanced testing device for A/V signal analysis and device calibration with support for resolutions up to 4K@60Hz (4:4:4), as well as HDMI 2.0 and HDCP 2.2 compliance.

The HDTools™ HDG Pro is an HDMI 2.0 Signal Generator supporting video resolutions up to 4K@60Hz 4:4:4, 18 Gbps bandwidth, and HDCP 2.2. This versatile tool allows integrators and installers to test and verify A/V signal paths with Test Pattern Generator, Signal Analyzer, HDCP Test, EDID Test, and Loop Test functions. The HDG Pro also features a 4.3” touchscreen for controlling the device and viewing the signal from the HDMI input, as well as a 4-hour rechargeable battery providing greater portability and ease of use.

 

Key Features:

  • 4K@60Hz 4:4:4 8 bit, 4K@60Hz 4:2:0 16 bit HDR pattern generator & signal analyzer
  • Support 18 Gbps bandwidth
  • 4.3” touchscreen panel
  • Digital audio test function
  • Supports HDMI loop through function
  • HDCP test function to verify HDCP source and transmit HDCP encrypted video
  • Supports user-defined patterns (up to 2Gb)
  • Scrambling function or videos over 340MHz
  • Video pass-through mode (analyze the signal and monitor the video at the same time)
  • Supports third-party device control via Ethernet/LAN
  • Rechargeable battery design (up to 4 hours)
  • Firmware update through USB flash drive
Technical Specifications
 Compliance HDMI 2.0, HDCP 2.2/1.4
 Supported Bandwidth 18 Gbps
 Supported Resolutions Up to 4K@50/60Hz (4:4:4)
 Color Space DVI, RGB, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
 Color Depth 8-bit, 10-bit, 12-bit, 16-bit
 Digital Audio Test Built-in PCM audio tone menu (test audio on display devices or A/V receivers) / set bits per sample, sample rate, level and audio channel
 Connector Types
 Input  [1] HDMI Type A [19-pin female]
[1] Ethernet [RJ45]
[1] Firmware [USB type A female]
 Output [1] HDMI Type A [19-pin female]
[1] Stereo Out [3.5mm mini-jack]
 Mechanical Specifications
 Power Supply 12V 5A
 Operational Temperature 86°F (30°C) or below
 Relative Humidity 60% or below RH (non-condensing)
 Dimensions (WxDxH)  
 Weight   

Description

Version

Size

Format

Product Sheet

1.0

1.0 MB

PDF