The VIP-101H II Transmitter encodes HDMI video and audio over IP in a convenient wall plate form factor.  The VIP-101 TX is compatible with the VIP-100H II IP distribution system offering point-to-point extension over distances up to 394 ft. (120 m), as well as a point-to-many, many to point, and matrix connections (up to 64×190 matrix, or even a 64 x 65K system based on Class B networks).

Key Features
    • Support resolutions up to Full HD/1080p
    • LED channel display
    • Front panel channel plus/minus buttons
    • IR remote control for familiar channel selection
    • PoE (Power over Ethernet) – power encoders/decoders from 802.3af PoE network switches
    • RS232 & IR extension/distribution
    • HDMI Loop out on Transmitter
    • HDCP compliant
    • Point-to-point or matrix system:
      – up to 64 x 190 matrix (hardware) on Class C networks
      – up to 64x 65K on Class B networks
    • HDCP compliant
Audio HDMI w/embedded audio
Cabling Cat 5 UTP or better
Input Signal Type(s) (1) HDMI v1.3 [19 pin Female]
Output Signal Type(s) RJ-45, H.264 UDP Multicast
Supported Distance 120 m / 390 ft.
Supported Resolutions Up to1080p / 1920x1080
Power Supply 100-240VAC 50/60Hz
Operating Temperature 32° ~ 117° F (0° to 47° C)
Storage Temperature - 40° ~ 158° F (-40° to 70° C)
Relative Humidity 0 ~ 90% non-condensing
MTBF 50,000 hours
Rack Mounting Option Standard 19 inch rack-mountable design
Rack Mounting Option Standard 19 inch rack-mountable design
Warranty Limited Warranty (3-Years)

VIP TX-RX Model Comparison Chart
1.4 02-06-2020 Download 617.4 KB
PureLink_Product Sheet_VIP-101H TX
1.0 09-01-2019 Download 975 KB